Ways to reduce wear on conveyor belts
In the operation process of the machine, it may be said that the daily workload of the conveyor belt is very large, and sometimes the tape will wear out during the work process. Individuals of these situations cannot be avoided. However, we may reduce the occurrence of this situation as much as possible. Here's how to reduce the wear of the conveyor belt tape:

　　1. The feeding port should avoid directly above the roller or idler;
　    2. In order to reduce the impact and wear of the material on the tape, the feeding direction should follow the running direction of the tape;
　　3. The drop of materials falling on the tape should be minimized;
　　4. The belt receiving section should shorten the distance between the rollers and adopt buffer measures. The rubber conveyor has the characteristics of heat-resistant belt, wear-resistant belt, burn-resistant belt, oil-resistant belt, alkali-resistant belt, alkali-resistant belt, heat-resistant belt, and cold-resistant belt. It is mainly used for the transportation of solid materials in various mining, metallurgy, steel, coal, hydropower, building materials, chemical, food and other enterprises. In order to avoid scratching the tape, the part of the contact between the scraper sweeping device of the stopper device and the unloading device and the tape should be made of rubber plates with suitable hardness, not tape heads with cloth layers;
　　5. Check the roller drum every day, and invent the timely replacement if it cannot run abnormally, and then check whether there is any attachment on the roller drum and clean it in time. The rubber conveyor has the characteristics of heat-resistant belt, wear-resistant belt, burn-resistant belt, oil-resistant belt, alkali-resistant belt, alkali-resistant belt, heat-resistant belt, and cold-resistant belt. It is mainly used for the transportation of solid materials in various mining, metallurgy, steel, coal, hydropower, building materials, chemical, food and other enterprises.
　　 In the process of using the conveyor belt, you must pay attention to the operating standards, pay more attention to the points introduced in the article, so as to greatly reduce the occurrence of this situation, I hope that everyone may help after reading the article.