Conveyor belt and its friction
Conveyor belts, also known as conveyor belts, are widely used in many companies and transportation industries to convey various blocks or pieces of products. It is easy to use, easy to repair and maintain, and has low freight costs. At the same time, it reduces engineering costs and saves manpower and material resources for work.
There are many types of conveyor belts, and various industries have different requirements for transportation. According to the different requirements of different fields, conveyor belts are divided into ordinary conveyor belts, nylon conveyor belts, oil-resistant conveyor belts, high-temperature conveyor belts, flame-retardant conveyor belts, etc. . Among them, flame-retardant conveyor belts can be divided into two major products: PVC flame-retardant conveyor belts and PVG flame-retardant conveyor belts.
Ordinary conveyor belts can be adapted to different conditions and can be made into different structural specifications such as edge-wrapped, open-edged, mid-ladder, and side-ladder. Especially widely used in building materials, chemical industry, coal, electric power, metallurgy, the use and transportation of non-corrosive heavier substances (except liquids), such as coal, stones, etc.
Nylon conveyor belts have the characteristics of thin belt body, impact resistance, good troughing performance and long use time. They are suitable for medium and long distance transportation. They are widely used for the transportation of non-corrosive lumps, granules, powders and other materials at room temperature, such as coal. Blocks, cement, etc., can also be used for the transportation of finished products.

The conveyor belt will friction with each part of the conveyor during the whole process of application. The friction within all normal ranges can ensure the life of the conveyor belt, but if the friction between the conveyor belt and other parts increases, it will affect the conveyor belt. Lead to damage, which will cause the conveyor belt to be scrapped early and the service life is not high in the long run. So when the conveyor belt runs the whole process, it will friction with these parts? The conveyor belt manufacturer below brought everyone in-depth analysis.
1. The friction between the sound card frame and the conveyor belt will cause the conveyor belt to deviate due to the defects caused by the manufacturing, installation, and application of the conveyor. When the direction is too heavy, the conveyor belt and the roller support , The sound card frame is touched and the edge glue is damaged, which makes the conveyor belt press the groove.
2. The friction between the partition of the guide trough and the conveyor belt, and the damage of the partition to the conveyor belt is this unique damage. If the layout of the partition is improved and maintenance is paid attention to, this type of damage can basically be avoided.