Burning through resistant conveyor belt
 High temperature resistant conveyor belt
 Heat resistant conveyor belt
 Chemical resistant conveyor belt
 Oil resistant conveyor belt
 EP conveyor belt
 NN conveyor belt
 CC TC conveyor belt
 Patterned conveyor belt
 Steel cord conveyor belt
 Wave shape edge conveyor belt
 Sidewall conveyor belt
 Endless conveyor belt
 Flat transmission belt
 Special conveyor belt
 Special flat transmission belt
PRODUCTS
 
 

Steel cord conveyor belt

 
USAGE:
Steel cord conveyor belts are widely used in high strength,long distance and heavy load transportation of materials,and they are also used in high strength and short distance transportaion of materials on special occasions.
 
SHARACTERISTISS :
1. High tensile strength:The belts are suitable for large span,long distance transportation of materials 
2. Small elongation in use:The belts need only a very short take-up stroke distance. 
3. Small diameter of drive pulley:The bely body has a layer of longitudinally arranged steel cords as its skeleton,and thus is resistant to flex fatigue.Therefore,drive pulley of smaller diameter can be used to make the equipment smaller. 
4.High adhesion between rubber and steel cord:The steel cords are coated with zinc on their surface,and also the rubber used has the property of qood adhesion with steel cords.Therefore,the rubber is tighrly adhered to the steel cords and is resistant to shock and difficult to drop,so the rubber belts are long in life. 
5.Even tension of steel cords:Out of our advanced techniques in manufacturing,the steel cords are very evenly arranged and have the same tension,so the belts are well balanced in running and difficult to run awry. 
6. Good troughability:As the belt body has no transverse skeleton,it is easyv to from a deep trogh,so the belts can load more materials and prevent the materials from escaping. 
7.Good troughability:As the belt boby has no transverse skeleton,it is easy to from a deep trough,so the belts can load more materials and prevent the materials from escaping.
8.Inspection of the belt with X-rays:Users can X-rays to inspect damages of the skeleton steel cords on the conveyor machines to prevent accidents from happening. 

Standard belt specification:
Standard belt specification
Belt strength
  (st-NO.)
Max Cord 
diam(mm)
composition Pitch 
(mm)
Standard 
working 
tension 
(N/mm)
standard 
cover
Thickn
esst1t2
(mm)
Belt
weight
(Kg/m2)
Min.pulley
diam(mm)
cord 
strngth 
KN/piece
St-630 3.0 K6x7+IWS 10 90 5x5 19.1 800 6.93
St-800 3.5 K6x7+IWS 10 110 5x5 20.6 800 8.8
St-1000 4.0 K6x7+IWS 12 140 6x6 24.7 800 13.2
St-1250 4.5 K6x7+IWS 12 175 6x6 25.4 800 16.5
St-1600 5.0 K6x19+IWS 12 225 6x6 26.0 1000 21.12
St-2000 6.0 K6x19+IWS 12 285 8x6 30.0 1000 26.4
St-2500 7.2 K6x19W+IWS 15 355 8x6 32.2 1250 41.25
St-3150 8.1 K6x19W+IWS 15 450 8x8 35.7 1400 51.98
St-3500 8.6 K6x19W+IWS 15 500 8x8 44.9 1500 57.7
St-4000 8.9 K6x19W+IWS 15 570 8x8 46.6 1600 66
St-4500 9.7 K6x19W+IWS 16 645 8x8 49 1800 79.2
St-5000 10.9 K6x19W+IWS 17 715 8.5x8.5 53.6 1800 93.5
St-5400 11.3 K6x19W+IWS 17 760 9x9 57.5 2000 101
 
Number of steel cords:
belt
width
mm
St630 St800 St1000 St1250 St1600 St2000 St2500 St3150 St3500 St4000 St4500 St5000 St5400
800 75 75 63 63 63 63 50 50 50 - - - -
1000 95 95 79 79 79 79 64 64 64 64 59 55 55
1200 113 113 94 94 94 94 76 76 77 77 71 66 66
1400 133 133 111 111 111 111 89 89 90 90 84 78 78
1600 151 151 126 126 126 126 101 101 104 104 96 90 90
1800 - 171 143 143 143 143 114 114 117 117 109 102 102
2000 -   159 159 159 159 128 128 130 130 121 113 113
2200 - - - - - 176 141 141 144 144 134 125 125
2400 - - - - - 193 155 155 157 157 146 137 137

Cover rubber property and grades :
Test items Property indexes
GB9770-2001 DIN22131
D H L P W X Y
Tdnsile strngth Mpa >= 18 25 20 14 18 25 20
Pull to break the 
elongation rate
% >= 400 450 400 350 400 450 400
after aging(70桢7D) 
Change rate of tensile 
strength Change 
rate of elongation
% -25~+25 -25~+25 -25~+25 -25~+25 -25~+25 -25~+25 -25~+25
Abrasion <= 90MM3 120MM3 150MM3 200MM3 90MM3 120MM3 150mm3
ADHHESION OF STEEL CORD:
strength St630 St800 St1000 St1250 St1600 St2000 St2500 St3150 St3500 St4000 St4500 St5000 St5400
Adhhesion 
N/mm 
GB9770-2001
60 70 80 95 105 105 130 140 145 150 165 175 180
Adhesion 
N/mm 
DIN22131-88
60 70 80 95 105 105 130 140 145 150 165 175 1