Burning through resistant conveyor belt
 High temperature resistant conveyor belt
 Heat resistant conveyor belt
 Chemical resistant conveyor belt
 Oil resistant conveyor belt
 EP conveyor belt
 NN conveyor belt
 CC TC conveyor belt
 Patterned conveyor belt
 Steel cord conveyor belt
 Wave shape edge conveyor belt
 Sidewall conveyor belt
 Endless conveyor belt
 Flat transmission belt
 Special conveyor belt
 Special flat transmission belt
PRODUCTS
 
 

CC TC conveyor belt

 

Cotton canvas is woven by cotton fibers both in warp and in weft,its elongation is relatively low,it is good in mechanical fastening and adhesion with rubber.Cotton conveyor belt has relatively small deformation under high temperature conditions, suitable for short-distance and light-load transportation of materials.Polyester cotton conveyor belt is the upgraded product of cotton conveyor belt,and its tension resistant body is woven by polyester cotton fibers in warp and cotton fibers in weft.Its comprehensive physical and mechanical characteristics are obviously better than that of cotton conveyor blet,especially the belt body is thinner and lighter,the belt has better shock resistance and thus the belt has better use function and can reduce energy and material consumption for users.it is suitable for medium, short-distance and medium-load transportation of materials.Specification and technical data of multi-ply cotton,polyester cotton conveyor belt:

Fabric 
type
Fabric 
structure
Fabric
specs
Ply 
thickness
(mm/P) 
Strength series
(N/mm)
Cover 
thickness(mm)
Winth
mm
Length
m
Warp Weft 2ply 3 ply 4ply 5ply 6ply Upper Lower
Cotton
(CC)
Cotton
(C)
Cotton
(C)
CC-56 1.10 112 168 224 280 226 2-8 0-4.5 400-2500 <=300
Polyester
Cotton
(TC)
Polyester 
Cotton
(TC)
Cotton
(C)
TC-70 1.0 140 210 280 350 420 1.5-8 0-4.5 400-2500 <=300

Cover properties of the belts:
Cover grade Tensile strength
>=
Elongation 
>=
Abraion 
>=
Change rate of tensile strength 
and elongation after aging
Mpa   % mm3  %
Light (L) 15 10   350 300 200 250 -30~+30

Adhesion and elongation of the belt:
Belt 
carcass
Adhesive strength Elongation  
Between  Piles 
N/mm
N/mm 
Between rubber and carcass
Longitudinal  Elongation at  break 
%>=
Longitudinal  Elongation %<=
Rubber  thickness<=1.5mm Rubber 
thickness>1.5mm
Cotton and T/C canvas >=2.70 >=2.4 >=2.7 10 4